SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSi wlan: 23k 13k ibss: 20k 26k.
VyprVPN Review & Rating - VPN SpecialWhen sending a high amount of traffic through the bridge (bidirectional iperf from one computer to another through the bridge), the WDS AP crashes repeatedly (roughly every hour, sometimes it takes a bit longer).Expected behaviour: The master access point of the router should always come up, regardless of the availability of the client network.I view this as a high-priority bug, because the Ubiquiti hardware is popular and the problem has been fixed in AirOS and DD-WRT.
I wrote a whole bug report about broken port forwarding on the Flyspray page.Mon Jun 12 01:41:15 2017 user.notice root: the button was wps and the action was released.By deactivating WMM mode and by restarting the router(route planner) everything works perfectly.During night, when router is almost idle, just some watchdog date sent via wwan, no problem.TYPE: firewall ACTION: remove INTERFACE: lan DEVICE: eth0.1 eth0.1.In order to try to solve this bug, I have tried to port some (at least to me) missing steps from the bootloader switch code and to the mt7620 switch driver in LEDE.Especially when browsing the web, it is very possible for you to come across various errors which you have no idea about.
It looks like fw3 is trying to do something with IPv6 NAT and failing.Sat Apr 8 19:01:20 2017 daemon.notice hostapd: wlan2: CTRL-EVENT-TERMINATING.I think it is important to check and solve it, because this behavior avoids warranty.
I am happy to provide ANY additional information you required.The VyprVPN for Windows application automatically configures and simplifies managing your VPN connections.It correctly switches to managed mode but no ESSID and no AP are assigned.SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSi wlan: 25k 1344 ibss: 2774 25k.
VyprVPN review – VPN service by Golden FrogSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSUi. wlan: 37k 864 ibss: 13k 46k.The network configuration is unchanged on both devices (except changing the LAN IP).
I have no releases between r2393 and r2443, thus it begins to happen if I upgrade WNDR3700v4 to 2443.Turning back to different versions this still happens, unfortunately I have not been able to test every single commit.Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub.After a powercycle the router starts again with the old firmware.
So if i put the 2 clients in different WLAN SSIDs or ethernet they get the broadcast from each other, but not when both are connected to the same.There has been a large number of reports of bugs with MT7621 devices in combination with SQM.WNDR3700v4 WAN port connected to BT Home Hub 5 Switch and assigned 1 IP in the public subnet WNDR3700v4 4 port switch connected to local switch and other devices on local private lan.Other possibly useful info: ifconfig shows the port sends packets (perhaps DHCP requests), but never receives anything. swconfig shows all octets received are bad, but also fewer octets than packets.Latest LEDE on Nexx WT3020 with MT7620 is getting syslog spammed with.I am having a problem on a UBNT UAP-LR where, if many clients stay connected the router for a long time, multicast packets will stop being reliably sent to the wireless clients.R0 00000000 7fcfd4c8 00000000 0090b7c0 00910df4 00910df9 2f2f2f2f bcd0a2f0.While on the same hardware running LEDE r578, the PPPoE module works as expected.Upon connecting any device, it is not recognised and there are no kernel messages.
VyprVPN - FacebookRestarting the router seems to fix the issue but after one or two hours of uptime, the issue arises again.If the server is connected to the client using a WiFi interface, the messages are received.
AsiaRF AWM688, based on the mtk7688 SoC, similar to the LinkIt 7688.There is nothing better than learning how to troubleshoot it yourself.When using ssh onto the box via adsl, there is a high latency. The last 3.18 version of lede works.Would also be great if there was an option to prevent automatic reboot after writing an image.
VyprVPN Reviews - Don't Buy a VPN Until you Read This!Setting 802.11w to anything other than disabled results in hostapd failing to initialize the interface.It looks like this can be fixed by checking if the button was actually pressed before calculating the holding time and sending the userspace event.SSHed into the rounter show nothing interesting in dmesg or the logs.
Supply the following if possible: - MQMaker WiTi - All released LEDE versions - enable the 5ghz interface.Overall, it may be the cross compilation process, overlay or something else entirely.Mon Mar 20 14:05:03 2017 daemon.debug hostapd: wlan1: STA 94:0c:6d:b0:f4:ac IEEE 802.11: association OK (aid 1).I fail to retrieve ethernet status information (e.g. the currently negotiated link speed).So it looks like some kernel-options are missing, after this merge of sub-targets.
After upgrading my R8000 from Chaos Calmer (15.05.1) to LEDE Reboot (17.01.0-rc2, r3131-42f3c1f), I found that I could no longer get the 5GHz radios to work as before. The 2.4GHz radio is fine.One-to-one NAT means you have LAN address on interface and its mapped 1:1 to external ip addresses.Tue Mar 21 09:58:59 2017 daemon.info hostapd: wlan1: STA 94:0c:6d:b0:f4:ac IEEE 802.11: authenticated.
Wed Jul 5 22:22:44 2017 user.notice: Added device handler type: veth.The router itself gets an address from the modem, but the relaying of requests from clients is not happening.
I want to use it as wireless repeater with extra SSID (i think someone call it WISP client).Fri Jul 7 00:32:11 2017 daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx WPA: pairwise key handshake completed (RSN).